Factory Cheap Hot Cationic Polymers Polyamine For Paper Mills - Chemical Polyamine 50% – Cleanwater
Factory Cheap Hot Cationic Polymers Polyamine For Paper Mills - Chemical Polyamine 50% – Cleanwater Detail:
Video
Description
This product is liquid cationic polymers of different molecular weight which work efficiently as primary coagulants and charge neutralization agents in liquid-solid separation processes in a wide variety of industries. It’s used for water treatment and paper mills.
Application Field
1.Water clarification
2.Belt filter, centrifuge and screw press dewatering
3.Demulsification
4.Dissolved air flotation
5.Filtration
Specifications
Appearance |
Colorless to Slight Yellow Transparent Liquid |
Ionic Nature |
Cationic |
pH Value(Direct Detection) |
4.0-7.0 |
Solid Content % |
≥50 |
Note: Our product can be made upon your special request. |
Application Method
1.When used alone, it should be diluted to the concentration of 0.05%-0.5%(based on solid content).
2.When used to treat different source water or waste water, the dosage is based on the turbidity and the concentration of the water. The most economical dosage is based on the trial. The dosing spot and the mixing velocity should be carefully decided to guarantee that the chemical can be mixed evenly with the other chemicals in the water and the flocs can not be broken.
3.It is better to dose the product continuously.
Package and Storage
1.This product is packaged in plastic drums with each drum containing 210kg/drum or 1100kg/IBC
2.This product should be sealed and stored in a dry and cool place.
3.It is harmless, no-flammable and non-explosive. It is not dangerous chemicals.
Product detail pictures:
Related Product Guide:
We believe in: Innovation is our soul and spirit. Quality is our life. Shopper need is our God for Factory Cheap Hot Cationic Polymers Polyamine For Paper Mills - Chemical Polyamine 50% – Cleanwater , The product will supply to all over the world, such as: Johannesburg, Sheffield, Sudan, We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
By Edward from Zambia - 2017.11.20 15:58
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Olive from Jamaica - 2017.08.16 13:39