Solid Polyacrylamide
Description
Polyacrylamide powder is an environmental friendly chemical .This product is a water- soluble high polymer.It’s not soluble in most organic solvents, It is a kind of linear polymer with high molecular weight, low degree of hydrolysis and very strong flocculation ability, and can reduce the friction resistance between liquid.
Application Field
Anionic Polyacrylamide
1. It can be used to treat industrial wastewater and mining wastewater.
2. It can also be used as an additive of the mud materials in oil-field, geological drilling and well boring.
3.It can also be used as a Friction Reducing Agent in drilling oil and gas fields.
Cationic Polyacrylamide
1. It is mainly used for the sludge dewatering and decrease the rate of water content of sludge.
2. It can be used to treat industrial wastewater and life sewage water.
3. It can be used for paper making to improve dry and wet strength of paper and to improve dry and wet strength of paper and to increase the reservation of tiny fibers and fillings.
4.It can also be used as a Friction Reducing Agent in drilling oil and gas fields
Nonionic Polyacrylamide
1. It is mainly used to recycle the wastewater from clay producing.
2. It can be used to centrifugalize the tailings of coal washing and filter the fine particles of iron ore.
3. It can also be used to treat industrial wastewater.
4.It can also be used as a Friction Reducing Agent in drilling oil and gas fields
Specifications
|
Item |
Cationic |
Anionic |
Nonionic |
|
Solid Content(%) |
≥88 |
≥88 |
≥88 |
|
Appearance |
White/light yellow granule or powder |
White/light yellow granule or powder |
White/light yellow granule or powder |
|
Molecular Weight |
2-10million |
5-25million |
5-15million |
|
Ionicity |
5-80 |
5-45 |
＜5 |
|
Note: Our products can be made upon customers’ special request |
|||
Application Method
1. The product should be prepared for the water solution of 0.1% as concentration. It is better to use neutral and desalted water.
2. The product should be scattered evenly in the stirring water, and the dissolving can be accelerated by warming the water (below 60℃).The dissolution time is around 60 minutes.
3. The most economical dosage can be determined based on a preliminary test. The pH value of the water to be treated should be adjusted before the treatment.
Package and Storage
1. Package: The solid product can be packed in kraft paper bag or PE bag, 25kg/bag.
2. This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35℃.
3. The solid product should be prevented from scattering on the ground because the hygroscopic powder can cause slipperiness.
 |
 |
 |
